Monday, March 2, 2009, we had the pleasure of interviewing Mr. Richard Humann, P.E., Vice President and Chief Water Resources Engineer for H2M, for our internet radio program “Keeping Your Family Safe” (find it at http://www.voiceamerica.com/ on the Green Talk Network). H2M, headquartered in Melville, NY, is a multi-disciplined engineering and architectural consulting firm that has worked in the field of public water supply for the past 75 years. Mr. Humann discussed drinking water safety and the processes municipal water suppliers go through to provide us with safe drinking water. In our program, we also covered the following points:
- Municipal water suppliers must test the drinking water to meet Federal, State, and local requirements (State and Local requirements must be as strict or stricter than Federal requirements).
- All municipal water suppliers must test drinking water for a minimum of 150 parameters.
- Treating water contaminated with MTBE is challenging to municipal water suppliers.
- The Environmental Protection Agency (EPA) has guidance documents for testing drinking water once it gets to our faucets.
- Water suppliers are required to continuously monitor the pH (corrosiveness) of water to ensure that the water does not cause the leaching of metals from the plumbing.
- Most municipal water does not need filtering or treatment at home. Chlorine taste or smell can be eliminated by putting the water in the refrigerator.
This Monday, March 9, 2009, we will be discussing “Dangers in the Basement” with Mr. Bob Krell, President of IAQ Technologies.
safety
asbestos
mold
lead
indoor air quality
occupational safety and health
occupational safety
OSHA
EPA
asbestos consulting
OSHA consulting
indoor air quality consulting
Long Island
asbestos
mold
lead
indoor air quality
occupational safety and health
occupational safety
OSHA
EPA
asbestos consulting
OSHA consulting
indoor air quality consulting
Long Island
